Here are relevant reports on : wind-turbine-blade-market
-
Small Wind Market by Type (Horizontal Axis Wind Turbine, Vertical Axis Wind Turbine), by Application (On-Grid, Off-Grid), by Geography (Asia-Pacific, North America, Europe) - Global Trends and Forecast to 2019
The increasing demand for renewable sources for energy generation and rapid industrialization has played a huge part in providing the necessary boost to the global small wind power market. The market for global small wind power has also expanded owing to the increasing energy demand and growing concerns over environmental impacts of power generation through fossil fuel. The global small wind power market is estimated to reach USD 1.89 Billion by 2019, with a projected CAGR of 19.5%, signifying a steady increase in the demand for small wind power.
- Published: August 2015
- Price: $ 4950
- TOC Available:
-
Global Wind Turbine Gearbox Market Outlook (2010-2015)
Global wind turbine market, a rapidly growing market segment of global renewable energy, has recorded double digit annual growth in the past ten years and the market is expected to maintain this growth till 2015 by reinstalling and additions of new generation turbines as well as increasing the size and efficiency of the turbines. In 2009, total 38,343 megawatts (MW) of wind turbines were installed bringing the worldwide wind power capacity to around 158,000 MW.
- Published: October 2024
- Price: $ 4950
- TOC Available:
-
Direct Drive (Gearless) Wind Turbine Market, By Permanent Magnet (PMSG) & Electrically Excited (EESG) Generator Technology, Turbine Size/Capacity Range – Global Trends & Forecasts to 2017
The direct drive (gearless) wind turbine is the low-speed generator that eliminates the need for a gearbox from the turbine’s drive train. These turbines have advantages such as - these are lighter as compared to conventional turbine, these have significantly lower maintenance costs, and it is not needed to replace gearbox as these are gearless turbines. The most preferred direct drive wind turbine generator is the permanent magnet type generator, as it is lighter in weight and possesses high reliability for offshore applications.
- Published: October 2012
- Price: $ 4950
- TOC Available:
-
Global & China Wind Turbine Market – by Offshore/Onshore type, Geography, Installed Capacity, Price Trends and Forecast (2010 - 2015)
Global Wind Turbine Market, a rapidly growing market segment of global energy, has recorded double digit annual growth in past ten years and the market is expected to maintain this growth till 2015 by reinstalling and addition of new generation turbines as well as increasing the size and efficiency of the turbines.
- Published: January 2011
- Price: $ 4950
- TOC Available:
-
Wind Turbine Protection Market by Equipment (Blades, Nacelles, Towers), Protection Type (Coatings (Epoxy, Polyurethane) and Tapes & Films), End User (Onshore and Offshore), & Region (North America, Europe, APAC, MEA) - Global Forecast to 2029
The wind turbine protection market is projected to reach USD 2.8 billion by 2029, at a CAGR of 10.5% during the forecast period. Some of the major players in the wind turbine protection market are BASF SE (Germany), 3M (US), Akzo Nobel N.V. (Netherlands), Trelleborg AB (Sweden), Hempel A/S (Denmark). The major strategies adopted by these players include sales contracts, product launches, investments, collaborations, partnerships, and expansions.
- Published: July 2024
- Price: $ 4950
- TOC Available:
-
Wind Turbine Tower Market, by Type (Tubular, Lattice, and Others), by Installation (Onshore and Offshore), by Region (Americas, Asia-Pacific, Europe, and Middle-East and Africa) – Global Trend & Forecast To 2019
Wind turbine towers are one of the most crucial components of a wind turbine system in terms of cost as well as dimension. The wind turbine tower market is dependent on changing design trends in the global wind turbine market. Growing use of higher blade sizes in the construction of wind turbine to provide better returns have had a strong impact over the design and manufacturing of wind turbine towers. Off late, blades of more than 38 meters length are being increasingly used in the construction of wind turbines which have insinuated a demand for longer turbine towers. Increasing investments towards renewable energy generation is also one of the key factors boosting the market for wind turbine towers. The market has been segmented on the basis of type, application and region in terms of value ($Million). The market segmentation by type has been done on the basis of construction into type’s tubular, lattice, and others. The market segments for wind turbine tower installation include onshore and offshore.
- Published: October 2024
- Price: $ 4950
- TOC Available:
-
High Performance Composites Market by Resin Type (Thermoset, Thermoplastic), Fiber Type (Carbon Fiber, S-Glass, Aramid Fiber) Application (Aerospace & Defense, Automotive, Pressure Vessel, Wind Turbine, Medical), Region - Global Forecast to 2022
The high performance composites market was valued at USD 23.50 Billion in 2016 and is projected to reach USD 33.33 Billion by 2022, at a CAGR of 6.0% from 2017 to 2022. Key companies profiled in this research report on the high performance composites market include Toray Industries Inc. (Japan), Hexcel Corporation (US), Solvay S.A. (Belgium), SGL Group-The Carbon Company (Germany), Koninklijke TenCate NV (Netherlands), TPI Composites (US), Owens Corning Corporation (US), Teijin Limited (Japan), and BASF SE (Germany).
- Published: July 2017
- Price: $ 4950
- TOC Available:
-
Turbine Governor Market - By Type (Steam, Gas & Hydro Turbine Control Solutions) (2012-2019)
- Published: October 2024
- Price: $ 4950
- TOC Available:
-
Wind Turbine Rotor Blade Market by Material (Glass Fiber, Carbon Fiber), by Blade Size (<27 Meter, 27-37 Meter, 38-50 Meter, and >50 Meter) and Geography - Global Trends and Forecasts to 2019
The use of carbon fiber is expected to grow at a fast rate as the trend for larger blade sizes takes a firm hold in the global market. The wind turbine rotor blade market is projected to grow at a CAGR of 9.2% from 2014 to 2019. In 2014, the market was dominated by Asia-Pacific, which had more than 54% of the total installed blades in the world. The region is projected to remain the most attractive market through to 2019, even as South America along with the Middle East and Africa are set to witness promising growth rates.
- Published: December 2014
- Price: $ 4950
- TOC Available:
-
Floating Power Plant Market by Power Source (Non-Renewable (Gas Turbines, IC Engines), Renewable (Solar Panels, Solar Floating Structure, Wind Turbines, Wind Substructure)), Capacity, and Region - Global Forecast to 2022
The global floating power plant market is expected to grow from an estimated USD 889.6 Million in 2017 to USD 1,440.1 Million by 2022, at a CAGR of 10.11%, from 2017 to 2022. To provide an in-depth understanding of the competitive landscape, the report includes the profiles of companies, such as MAN Diesel & Turbo SE (Germany), Mitsubishi Corporation (Japan), Wartsila (Finland), General Electric Company (U.S.), Siemens AG (Germany), Caterpillar, Inc. (U.S.), Ciel & Terre International (France), Floating Power Plant A/S (Denmark), Ideol (France), Kyocera Corporation (Japan), Principle Power, Inc.(U.S.), Upsolar (Hong Kong), Vikram Solar Pvt., Ltd. (India), Yingli Solar (China), and SeaTwirl AB (Sweden), among others. The dominant players are trying to gain a foothold in developing economies and are adopting various methods to grab the market share.
- Published: August 2017
- Price: $ 4950
- TOC Available:
Records 1 to 10 of 50
